Помогите с BGP в MT 2.9.27.

Мне нужно настроить эту конфигурацию в MT 2.9.27. Этот файл конфигурации от Zebra, но я не знаю, как это сделать в MT 2.9.27! ! Конфигурация Zebra сохранена из vty! 2006/11/23 11:20:57 ! hostname ugranet password xxxx enable password xxxxx ! bgp config-type cisco ! router bgp 41058 no synchronization bgp router-id 86.55.12.238 bgp always-compare-med bgp deterministic-med neighbor 11.11.11.1 remote-as 41011 neighbor 11.11.11.1 next-hop-self neighbor 11.11.11.1 send-community both neighbor 11.11.11.1 soft-reconfiguration inbound neighbor 11.11.11.1 prefix-list pl-41011 in neighbor 86.55.12.237 remote-as 30890 neighbor 86.55.12.237 next-hop-self neighbor 86.55.12.237 send-community both neighbor 86.55.12.237 soft-reconfiguration inbound neighbor 86.55.12.237 prefix-list UGRANETadv out neighbor 86.55.12.237 route-map rm-evo-out out no auto-summary ! ip prefix-list UGRANETadv seq 10 permit 89.36.232.0/22 ip prefix-list UGRANETadv seq 100 permit 89.36.232.0/22 ge 32 ip prefix-list UGRANETadv seq 1000 deny 0.0.0.0/0 le 31 ip prefix-list pl-41011 seq 10 permit 89.36.232.0/22 ip prefix-list pl-41011 seq 100 permit 89.36.232.0/22 ge 32 ip prefix-list pl-41011 seq 1000 deny 0.0.0.0/0 le 31 ! route-map rm-evo-out permit 20 match ip address prefix-list UGRANETadv set community 30890:1120 30890:2000 30890:3000 additive ! line vty !